Familiarize yourself with all of the components before beginning installation.
Contacting Garmin, contact Garmin Product Support if you have any questions while using your GHP.
Remove the last page and refer to the checklist as you proceed through the GHP 10 installation.
Keep the original sales receipt, or a photocopy, in a safe place.Enjoy the Simple Interface and nmea Connectivity.Use the nmea 2000 power cable and two terminators to create a nmea 2000 network on your boat if one does not exist.The Shadow Drive system automatically disengages the autopilot if the helm is turned, allowing the helmsman to maneuver the boat.As you familiarize yourself with the GHP 10 components, confirm that your package includes the following items.Hydraulic Considerations.0 L and.2 L Pumps Different boats have different hydraulic considerations you must red orchestra 2 wallhack examine before mounting the pump or disconnecting any hoses.The GHP 10's simple interface makes operation a cinch.
With a GHP 10, boaters will experience confidence and security from the 3-inch color GHC 10 autopilot control unit display that is designed to help boaters configure and control the autopilot.
When drilling or cutting, always check the opposite side of the surface.
Before starting the hydraulic installation, verify the type of hydraulic steering in your boat, and where to install the appropriate type of pump.
Disconnect the hydraulic lines from the steering system where appropriate.
Watch the short video below to learn more about some of the other features and benefits of the GHP 10, including Garmin's patented Shadow Drive technology that automatically disengages the autopilot if the helm is turned, allowing for quick and safe manual maneuvers without manually.This breakthrough unit gives power boat users an easy to use autopilot system to rely upon for auto-guided navigation.Note: There is an installation checklist on the last page of these instructions.Shadow Drive: Mount the Shadow Drive.Notice If the hydraulic steering of your boat does not match the hydraulic layouts in this manual, contact Garmin Product Support.This control unit communicates with the autopilot system via a nmea 2000 bus, so autopilot heading data can be shared easily with other devices.